OrbiSIMS – simultaneous high-mass resolving power and high-spatial resolution mass spectrometry imaging for biological and advanced materials characterisation (Великобритания (Англия, Шотландия, Уэльс) - Тендер #37715936) | ||
| ||
Для перевода текста тендера на нужный язык воспользуйтесь приложением: | ||
Страна: Великобритания (Англия, Шотландия, Уэльс) (другие тендеры и закупки Великобритания (Англия, Шотландия, Уэльс)) Организатор тендера: National Physical Laboratory Номер конкурса: 37715936 Дата публикации: 24-01-2023 Источник тендера: Государственные закупки Уэльса (часть Соединённого Королевства Великобритании и Северной Ирландии) |
||
Title: | OrbiSIMS – simultaneous high-mass resolving power and high-spatial resolution mass spectrometry imaging for biological and advanced materials characterisation |
OCID: | ocds-h6vhtk-0399e3 |
Published by: | National Physical Laboratory |
Authority ID: | AA63049 |
Publication Date: | 24/01/2023 |
Deadline Date: | |
Deadline Time: | |
Notice Type: | VEAT |
Has Documents: | No |
Has SPD: | No |
Abstract: |
The OrbiSIMS instrument shall be equipped with a time-of-flight mass spectrometer (ToF) for high-speed imaging of large areas or in 3D. It shall also be equipped with a high-field Orbitrap mass spectrometer with a mass resolving power of >240,000 at m/z 200 and a mass accuracy of ~ 1 ppm. The instrument shall be equipped with 3 primary ion beams which are optimal for different materials systems. (1) A 20 kV gas cluster ion source with a spatial resolution < 2 µm used for biological imaging and depth-profiling of organic materials, (2) a low energy (250 eV to 2000 eV) dual source (Cs and O2) sputter beam with high-current (>50 nA at 500 eV with a spatial resolution < 40 µm) for depth profiling of semiconductor samples and (3) a 30 kV high-resolution Bi nanoprobe with a spatial resolution < 50 nm. The instrument shall be able to operate with either the ToF analyser or the Orbitrap analyser or a combination of the two as described in the Nat. Methods paper. (4) a Ga focused ion beam with accelerating voltages of up to 30 kV, minimum bema diameter of 60nm and beam current > 25 nA. The OrbiSIMS shall be equipped for cryogenic analysis (sample holder temperature < -150 oC) and be compatible with and including Leica sample holders and allow the docking of a Leica VCT-500 cryo transfer vessel. It shall have two high-resolution TV cameras for direct sample observation and rapid location of the area of interest, as well as a photo box for high-resolution sample navigation. In addition to mass analysers, the instrument shall have a pulsed high-quality Everhart-Thornley secondary electron detector, located at grazing incidence to the sample, for primary ion induced secondary electron imaging and a self-adjusting charge compensation system using a pulsed, low energy electron flood gun. Samples shall be mounted using a rapid sample introduction system, with one sample holder for rear mounting of up to 18 samples with maximum dimensions of 10 mm x 10 mm x 8 mm, including mounting accessories, one sample holder for top mounting of multiple samples on an area of 100 mm x 80 mm with a maximum thickness of up to 20 mm, and one sample holder for mounting samples for cryogenic analysis. |
Directive 2014/24/EU
National Physical Laboratory
Hampton Road
Teddington
TW11 0LW
UK
Contact person: Mandy Morgan
Telephone: +44 2089436731
E-mail: mandy.morgan@npl.co.uk
NUTS: UK
Internet address(es)
Main address: www.npl.co.uk
Body governed by public law
Other: Research
OrbiSIMS – simultaneous high-mass resolving power and high-spatial resolution mass spectrometry imaging for biological and advanced materials characterisation
II.1.2) Main CPV code38000000
II.1.3) Type of contractSupplies
II.1.4) Short descriptionNPL pioneered the next generation OrbiSIMS technology introduced in detail in Nature Methods (2017, PMID: 29131162). The instrument is equipped with a time-of-flight mass spectrometer (ToF) for high-speed imaging of large areas or in 3D. It is also equipped with a high-field Orbitrap mass spectrometer with a mass resolving power of >240,000 at m/z 200 and a mass accuracy of approximately 1 ppm. Both ToF and Orbitrap analysers can be used simultaneously or separately. The OrbiSIMS shall be able to carry out cryogenic analysis under ultra-high vacuum with sample holder temperatures below –150 oC.
II.1.6) Information about lotsThis contract is divided into lots: No
II.1.7) Total value of the procurementValue excluding VAT: 2 254 326.75 EUR
NUTS code:
UK
II.2.4) Description of the procurementThe OrbiSIMS instrument shall be equipped with a time-of-flight mass spectrometer (ToF) for high-speed imaging of large areas or in 3D. It shall also be equipped with a high-field Orbitrap mass spectrometer with a mass resolving power of >240,000 at m/z 200 and a mass accuracy of ~ 1 ppm. The instrument shall be equipped with 3 primary ion beams which are optimal for different materials systems. (1) A 20 kV gas cluster ion source with a spatial resolution < 2 µm used for biological imaging and depth-profiling of organic materials, (2) a low energy (250 eV to 2000 eV) dual source (Cs and O2) sputter beam with high-current (>50 nA at 500 eV with a spatial resolution < 40 µm) for depth profiling of semiconductor samples and (3) a 30 kV high-resolution Bi nanoprobe with a spatial resolution < 50 nm. The instrument shall be able to operate with either the ToF analyser or the Orbitrap analyser or a combination of the two as described in the Nat. Methods paper. (4) a Ga focused ion beam with accelerating voltages of up to 30 kV, minimum bema diameter of 60nm and beam current > 25 nA. The OrbiSIMS shall be equipped for cryogenic analysis (sample holder temperature < -150 oC) and be compatible with and including Leica sample holders and allow the docking of a Leica VCT-500 cryo transfer vessel. It shall have two high-resolution TV cameras for direct sample observation and rapid location of the area of interest, as well as a photo box for high-resolution sample navigation. In addition to mass analysers, the instrument shall have a pulsed high-quality Everhart-Thornley secondary electron detector, located at grazing incidence to the sample, for primary ion induced secondary electron imaging and a self-adjusting charge compensation system using a pulsed, low energy electron flood gun. Samples shall be mounted using a rapid sample introduction system, with one sample holder for rear mounting of up to 18 samples with maximum dimensions of 10 mm x 10 mm x 8 mm, including mounting accessories, one sample holder for top mounting of multiple samples on an area of 100 mm x 80 mm with a maximum thickness of up to 20 mm, and one sample holder for mounting samples for cryogenic analysis.
II.2.11) Information about optionsOptions: No
II.2.13) Information about European Union fundsThe procurement is related to a project and/or programme financed by European Union funds: No
Award of a contract without prior publication of a call for competition
Justification for selected award procedure:
The procurement falls outside the scope of application of the Directive
Explanation:
The OrbiSIMS concept was created at NPL and the first prototype instrument was built in a collaborative project with IONTOF and ThermoFisher Scientific. The instrument was subsequently commercialised by IONTOF and sold as the Hybrid SIMS. IONTOF are the only manufacturer of this type of instrument. A number of features of the OrbiSIMS instrument are protected by international patents. Unique features of the OrbiSIMS instrument include:
1. Imaging of biomolecules from tissue using a gas cluster ion beam with a spatial resolution of < 2 µm simultaneously with a mass resolving power of > 240,000 at m/z 200.
2. Depth resolution of < 10 nm of organic molecules in an organic multilayer reference sample simultaneously with a mass resolving power of > 240,000 at m/z 200.
3. Depth resolution of < 2 nm of ions in an inorganic semiconductor delta-layer reference sample simultaneously with a mass resolving power of > 240,000 at m/z 200.
4. Cryogenic imaging (see requirement 1) with a sample holder temperature of < -150 oC. Samples shall be mounted on Leica sample mounts. The instrument shall accept docking of a Leica VCT-500 cryo transfer vessel and have provision to receive samples into the instrument.
IV.1.8) Information about Government Procurement Agreement (GPA)The procurement is covered by the Government Procurement Agreement: No
23/01/2023
V.2.2) Information about tendersThe contract has been awarded to a group of economic operators: No
V.2.3) Name and address of the contractorIONTOF GmbH
Heisenbergstr 15
Munster
48149
DE
NUTS: DE
The contractor is an SME: No
V.2.4) Information on value of the concession and main financing terms (excluding VAT) V.2.5) Information about subcontractingThe contract/concession is likely to be subcontracted
NPL Management Ltd
Hampton Road
Teddington
TW11 0LW
UK
23/01/2023
Information added to the notice since publication.
Additional information added to the notice since it"s publication.No further information has been uploaded. |
Main Contact: | mandy.morgan@npl.co.uk |
Admin Contact: | N/a |
Technical Contact: | N/a |
Other Contact: | N/a |
ID | Title | Parent Category |
---|---|---|
38000000 | Laboratory, optical and precision equipments (excl. glasses) | Technology and Equipment |
ID | Description |
---|---|
100 | UK - All |
The buyer has restricted the alert for this notice to suppliers based in the following regions.
Alert Region RestrictionsThere are no alert restrictions for this notice. |