Laboratory, optical and precision equipments (excl. glasses) (Швеция - Тендер #46788757)

1. Section I
   1. Name and addresses
      Linköpings universitet
      Upphandlingsenheten
      Linköping
      58183
      Sweden
      E-mail: jessica.thoresson@liu.se
      
   2. Joint procurement
      
   3. Communication
      The procurement documents are available for unrestricted and full direct access, free of charge, at
      https://tendsign.com/doc.aspx?UniqueId=afjiztpzpm&GoTo=Docs
      Additional information can be obtained from the abovementioned addresselectronically via: https://tendsign.com/doc.aspx?UniqueId=afjiztpzpm&GoTo=Tender
      
      
   4. Type of the contracting authority:
      Ministry or any other national or federal authority, including their regional or local subdivisions
      
   5. Main activity:
      Education
      
2. Section II
   1. Scope of the procurement:
      1. Title:
         

         Nanoindenter

         Reference number: IFM-2023-00334
         
      2. Main CPV code:
         38000000
         
      3. Type of contract:
         Supplies
         
      4. Short description:
         

         Procurement of a new Nanoindenter to IFM/LiU.

         The equipment will primarily be used for research on thin films synthesized by techniques such as magnetron sputtering and arc deposition. There is a variety in the application areas, thus thin films with various mechanical properties and thicknesses are of relevance. Hard coatings for wear resistant applications constitutes a substantial part of the research interest, thus characterization of hard coatings on more compliant substrates will be required.

         The equipment will be used to probe the mechanical properties, primarily hardness and elasticity, but also crack growth and fracture. Typical materials investigated include, but is not limited to, TiN, TiAlN, CrN, Al2O3, Ti3SiC2 and metallic multicomponent alloys.

         A more detailed description of the procurement object and the requirements is presented in chapter 2, Specification of requirements.

      5. Estimated total value:
         
         
      6. Information about lots:
         This contract is divided into lots: no
   2. Description
      1. Title:
         
      2. Additional CPV code(s):
         
         
      3. Place of performance:
         Main site or place of performance:

         Linköping

      4. Description of the procurement:
         

         Procurement of a new Nanoindenter to IFM/LiU.

         Scope and objective

         The material research of the Department of physics, chemistry and biology is focused on understanding relationships between synthesis, microstructures and properties of materials. The research covers several materials and syntheses techniques and often forms the basis for new and improved materials and processes of interest for industrial applications. Much of the material research focuses on thin films or surfaces. The equipment will be installed at the Nanostructured materials group but will be available for all interested users at the department.

         The equipment will primarily be used for research on thin films synthesized by techniques such as magnetron sputtering and arc deposition. There is a variety in the application areas, thus thin films with various mechanical properties and thicknesses are of relevance. Hard coatings for wear resistant applications constitutes a substantial part of the research interest, thus characterization of hard coatings on more compliant substrates will be required.

         The equipment will be used to probe the mechanical properties, primarily hardness and elasticity, but also crack growth and fracture. Typical materials investigated include, but is not limited to, TiN, TiAlN, CrN, Al2O3, Ti3SiC2 and metallic multicomponent alloys.

         The Equipment, including e.g. PC and electronics, will be placed in a room with dimensions of 2.9 x 2.9 m. Today, there is a vibration isolated table (Newport) in the room with outer dimensions of 90 x 90 cm and height of 74 cm. The vibration isolated plate is 60 x 49 cm. This table can be used to hold the Equipment if required by the supplier.

         The Equipment must include all components in terms of hardware and software necessary to achieve the described functions and specifications in the procurement documents.

         In addition to the Equipment, and associated service and support, LiU must be able to order consumables, spare parts and accessories under this contract.

         A more detailed description of the procurement object and the requirements is presented in chapter 2, Specification of requirements.

      5. Award criteria:
         Price is not the only award criterion and all criteria are stated only in the procurement documents
      6. Estimated value:
         
         
      7. Duration of the contract, framework agreement or dynamic purchasing system:
         
         Start: 2023-12-11
         End: 2028-12-10
         This contract is subject to renewal: no
         
      8. Information about the limits on the number of candidates to be invited:
         
      9. Information about variants:
         Variants will be accepted: no
         
      10. Information about options:
          Options: no
      11. Information about electronic catalogues:
          
          
      12. Information about European Union funds:
          The procurement is related to a project and/or programme financed by European Union funds: no
      13. Additional information:
          
3. Section III
   1. Conditions for participation:
      1. Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers:
         
      2. Economic and financial standing:
         
      3. Technical and professional ability:
         
      4. Information about reserved contracts:
         
   2. Conditions related to the contract:
      1. Information about a particular profession:
         
      2. Information about staff responsible for the performance of the contract:
         
4. Section IV
5. Description:
   1. Type of procedure:
      Open procedure
   2. Information about a framework agreement or a dynamic purchasing system:
      
   3. Information about reduction of the number of solutions or tenders during negotiation or dialogue:
      
   4. Information about negotiation:
      
   5. Information about electronic auction:
      
   6. Information about the Government Procurement Agreement (GPA):
      The procurement is covered by the Government Procurement Agreement: yes
6. Administrative information:
   1. Previous publication concerning this procedure:
      
   2. Time limit for receipt of tenders or requests to participate:
      Date: 2023-11-10
      Local time: 23:59
      
   3. Estimated date of dispatch of invitations to tender or to participate to selected candidates:
      
   4. Languages in which tenders or requests to participate may be submitted:
      EN, SV
   5. Minimum time frame during which the tenderer must maintain the tender:
      Tender must be valid until: 2024-03-11
      (from the date stated for receipt of tender)
      
   6. Conditions for opening of tenders:
      Date: 2023-11-13
      Local time: 00:00
      

Источник закупки

Импорт - Экспорт по стране Швеция