computer hardware and software (Канада - Тендер #41474808)

我们很高兴能与你们的团队合作，开发一个能够满足我们需求的水培活墙系统。以下是该项目的详细RFQ：
系统概述：
水培活墙系统是一个室内植物生长系统，利用富含营养的水溶液来支持各种植物的生长。该系统将最大限度地利用空间，同时最小化用水和能源消耗。为了实现这一目标，我们已经预先选择了以下硬件组件：
硬件组件：
水泵：
将使用两个流量至少为每小时100加仑的水泵来循环水流通过系统。
水泵应该是可靠和节能的。
水泵是基于其性能数据表预先选择的，可根据要求提供。
该系统应该允许用户通过触摸屏用户界面控制泵的循环间隔。
计量泵：
将使用四个流量至少为每分钟20毫升的计量泵来向植物提供营养物质。
计量泵应该是准确、可靠和节能的。
计量泵是基于其性能数据表预先选择的，可根据要求提供。
该系统应该允许用户根据植物的需求和水中营养物浓度编程计量泵的定时。
LED灯：
集成LED灯将用于为植物提供照明。
LED灯应该是节能、可靠的，并具有最小2000流明的输出。
LED灯是基于其性能数据表预先选择的，可根据要求提供。
该系统应该允许用户通过触摸屏用户界面控制LED灯的强度和循环间隔。
风扇：
将使用内置风扇通过系统循环空气，以防止霉菌和确保适当的通风。
风扇应该是高效、可靠的，并具有小于50分贝的噪音水平。
风扇是基于其性能数据表预先选择的，可根据要求提供。
该系统应该允许用户根据系统内的温度和湿度编程风扇的循环间隔。
传感器：
水位传感器：用于监测系统中的水位，并在水位过低时向用户发出警报。
总溶解固体传感器：用于监测水中溶解固体的浓度，并在浓度过高时向用户发出警报。
水流量传感器：用于测量水通过系统的流量并确保适当循环。
水温度传感器：用于监测水温，并在温度超出可接
We are excited to collaborate with your team to develop a hydroponic living wall system that meets our needs. Here is a detailed RFQ for the project:
System Overview:
The hydroponic living wall system is an indoor plant growing system that uses nutrient-rich water solutions to support the growth of a variety of plants. The system will maximize space utilization while minimizing water and energy consumption. To achieve this, we have pre-selected the following hardware components:
Hardware Components:
Water Pumps:
Two water pumps with a flow rate of at least 100 gallons per hour will be used to circulate water through the system.
The water pumps should be reliable and energy-efficient.
The water pumps are pre-selected based on their performance data sheet, which is available upon request.
The system should allow the user to control the pumps cycling intervals through the touch screen user interface.
Dosing Pumps:
Four dosing pumps with a flow rate of at least 20 mL per minute will be used to deliver nutrients to the plants.
The dosing pumps should be accurate, reliable, and energy-efficient.
The dosing pumps are pre-selected based on their performance data sheet, which is available upon request.
The system should allow the user to program the dosing pump timings based on plant requirements and nutrient concentration in the water.
LED Lights:
Integrated LED lights will be used to provide illumination for the plants.
The LED lights should be energy-efficient, reliable, and have a minimum output of 2000 lumens.
The LED lights are pre-selected based on their performance data sheet, which is available upon request.
The system should allow the user to control the LED light intensity and cycle intervals through the touch screen user interface.
Fans:
Onboard fans will be used to circulate air through the system to prevent mold and ensure proper ventilation.
The fans should be efficient, reliable, and have a noise level of less than 50 dB.
The fans are pre-selected based on their performance data sheet, which is available upon request.
The system should allow the user to program the fan cycling intervals based on the temperature and humidity inside the system.
Sensors:
Water level sensor: to monitor the water level in the system and alert the user when the level is low.
Total dissolved solids sensor: to monitor the concentration of dissolved solids in the water and alert the user when the level is too high.
Water flow sensor: to measure the flow rate of water through the system and ensure proper circulation.
Water temperature sensor: to monitor the temperature of the water and alert the user when it is outside the acceptable range.
Microcontroller Board:
The microcontroller board will be used to control the system and interface with the sensors and hardware components.
The board should have sufficient processing power, memory, and I/O pins to handle the data and control requirements of the system.
The board should have wifi connectivity to allow remote access to the system.
Software Requirements:
User Interface:
The system should have a touch screen display with a minimum resolution of 800x480.
The user interface should provide access to the following information and controls:
System status, including pump and dosing pump status, water level alerts, and prompts to clean water based on total dissolved solids.
Plant details, including the species, growth stage, and nutrient requirements.
Pump and fan cycling intervals, dosing pump timings, and LED light intensity.
Alerts and prompts to the user, such as low water level or high total dissolved solids.

Country: Canada

Источник закупки

Перейти

Импорт - Экспорт по стране Канада